| Vchip |
| Bus Converter Module (BCM) Evaluation Board |
| Evaluation Board Model # | BCM Input / Output Ratings |
| B048F015T14-EB |
|
| B048F030T21-EB | 48 V to 3.0 V @ 210 W |
| B048F040T20-EB | 48 V to 4.0 V @ 200 W |
| B048F060T24-EB |
|
| B048F080T24-EB | 48 V to 8.0 V @ 240 W |
| B048F096T24-EB | 48 V to 9.6 V @ 240 W |
| B048F120T30-EB |
|
| B048F160T24-EB | 48 V to 16 V @ 240 W |
| B048F240T30-EB | 48 V to 24 V @ 300 W |
| B048F320T30-EB | 48 V to 32 V @ 300 W |
| B048F480T30-EB |
|
| B352F110T24-EB | 352 V to 11 V @ 240 W |
| B352F110T30-EB | 352 V to 11 V @ 300 W |
| B384F120T30-EB |
|
| High Voltage Bus Converter Series Array Evaluation Board |
| BCM Input / Output Ratings | Evaluation Board Model # BCM |
| 380 V to 48 V @ 25 A | B384F120T30-SB |
| and / or 12 V @ 25 A |
| 1200 W max. total |
| High Voltage Bus Converter Parallel Array Evaluation Board |
| BCM Input / Output Ratings | Evaluation Board Model # BCM |
| 380 V to 12 V @ 1200 W | B384F120T30-PB |
| PRM / VTM Customer Evaluation Boards |
| The VICBrick Intermediate Bus Converter | 1 or 2 V•I Chip BCMs mounted on a PCB |
| Industry standard -brick format |
| Up to 100 A or 600 W output |
| Intermediate Bus voltages from 3 to 48 Vdc |
| Efficiencies >96% |
| 600 W |
| Maxi, Mini and Micro DC-DC Converters |
| Input Voltages: | 24 V (18 – 36 V) |
| 28 V (10 – 36 V) |
| 48 V (36 – 75 V) |
| 72 V (43 – 110 V) |
| 110 V (66 – 154 V) |
| 150 V (100 – 200 V) |
| 300 V (180 – 375 V) |
| 375 V (250 – 425 V) |
| Output Voltages: | 2 – 54 Vdc |
| Output Power (per module): | Maxi: 160 – 600 W |
| Mini: 100 – 300 W |
| Micro: 50 – 150 W |
| Efficiency: | Up to 90% |
| Dimensions: | Maxi (full brick): 4.6" x 2.2" x 0.5" (117 x 55,9 x 12,7 mm) |
| Mini (half brick): 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) |
| Micro (quarter brick): 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) |
| VI-200 / VI-J00 DC-DC Converters |
| Input Voltages: | 10 – 400 Vdc |
| Output Voltages: | 1 – 95 Vdc |
| Output Power: (per module) | VI-200: 50 – 200 W |
| | VI-J00: 25 – 100 W |
| Efficiency: | Up to 90% |
| Dimensions: | |
| VI-200 (full brick): | 4.6" x 2.4" x 0.5" (116,9 x 61,0 x 12,7 mm) |
| VI-J00 (half brick): | 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) |
| BatMod Current Source Module |
| Input Voltage: | 48, 150, 300 Vdc |
| Output Voltages: | 12, 24, 48 Vdc |
| Output Power (per module): | 200 W |
| Efficiency: | Up to 90% |
| Dimensions (full brick): | 4.6" x 2.4" x 0.5" (116,9 x 61,0 x 12,7 mm) |
| VI BRICK™ PFM™ Isolated AC-DC Converter with PFC |
| 1/8 Brick High Power | Input Voltages: 38 – 55 V / 36 – 60 V |
| Output Voltage: 9.6, 12 V at 48 Vin |
| Output Power: 500 W |
| Output Current: 48 A, 40 A |
| Efficiency: Up to 98% |
| 1/8 Brick Medium Power | Input Voltages: 38 – 55 V / 36 – 60 V |
| Output Voltage: 9.6, 12 V at 48 Vin |
| Output Power: 300 W |
| Output Current: 40 A, 32 A |
| Efficiency: Up to 98% |
| 1/4 Brick High Power | Input Voltages: 38 – 55 V / 36 – 60 V |
| Output Voltage: 9.6, 12 V at 48 Vin |
| Output Power: 650 W |
| Output Current: 64 A, 53 A |
| Efficiency: Up to 98% |
| VI BRICK™ PFM™ Isolated AC-DC Converter with PFC |
| Input Voltage: | 85– 264 Vac (rectified), 47-63 Hz |
| Output Voltages: | 48 V isolated and regulated output |
| Output Power (per module): | 330 W |
| Efficiency: | Up to 93% |
| Dimensions (full brick): | 1.92" x 1.91" x 0.37" (48.8 x 48.6 x 9.5 mm) |
| VI BRICK™ DC-DC Converters |
| Input Voltage: | 36 – 75 Vdc |
| Output Voltages: | 1 – 48 Vdc |
| Output Power (per module): | 100 – 220 W |
| Efficiency: | Up to 93% |
| Dimensions (full brick): | 2.19" x 1.91" x 0.37" (55,7 x 48,6 x 9,5 mm) |
| VI BRICK™ BCM Thermally Enhanced |
| Input Voltage: | 38 – 55 Vdc, 330 – 365 Vdc, 360 – 400 Vdc |
| Output Voltages: | 1.19 – 55.0 Vdc |
| Output Power (per module): | 135 – 300 W |
| Efficiency: | Up to 96.4% |
| Dimensions (full brick): | 1.91" x 1.09" x 0.37" (48,6 x 27,7 x 9,5 mm) |
| VI BRICK BCM Array™ |
| Input Voltage: | 384 Vdc (360 – 400), 352 Vdc (330 – 365) |
| Output Voltages: | 12, 48 Vdc (nominal) |
| Output Power (per module): | Up to 650 W |
| Efficiency: | 95% (typical) |
| Dimensions (full brick): | 3.54" x 0.56" x 1.13" (89,9 x 14,2 x 28,7 mm) |
| VIPAC Power System – 50-900 Watts | Single, dual or triple outputs |
| Two output terminations styles |
| Protective features: Inrush current limiting, transient protection, |
| EMI filtering |
| Choice of output terminations: LugMate or PlugMate |
| Local or remote control |
| Rugged low profile coldplate |
| Heat sink platforms available |
| FlatPAC – 50-600 Watt Power System | Single, dual, or triple outputs |
| Microprocessor-controlled front end |
| FCC Part 15, Class B, EN55022, Class B |
| 40 ms hold up |
| Module disable |
| BUS OK and AC OK |
| Finned or conduction-cooled package |
| 22 Standard output voltages from 2 95 Vdc |
| Low-noise ZCS / ZVS power topology |
| Transient surge: EN61000-4-5 |
| Conduction-cooled models available |
| Custom output voltages also available |
| BatMod current-source option available |
| Overvoltage protection and thermal shutdown |
| FlatPAC-EN – AC-DC Power Supply | RoHS compliant |
| EN 61000-3-2A14 Harmonic Current Compliance |
| Autosense feature |
| Compliant to EN 55022, Class A |
| EN55022, Class B (certain configurations) |
| Rugged: Meets MIL-STD-810E for vibration |
| Drop-in upgrade to Vicor's "2-up" FlatPAC |
| RS-232 Microcontroller Interface |
| LoPAC Family - AC-DC Switcher Power Supplies | RoHS compliant |
| Near unity power factor |
| Power factor corrected |
| Meets MIL-STD-810E for vibration (PFC Mini) |
| Choice of full, half, or quarter brick |
| Up to 6 user-specifiable outputs |
| High power density: Up to 11 W/in3 |
| Autosense feature |
| Fan cooled |
| MegaPAC Family – User and Field-Configurable Power Supply | RoHS compliant |
| User and field-configurable outputs |
| DC input capability |
| Power factor corrected (some models) |
| Up to 20 outputs |
| Low ripple 10 mV p-p or 0.15%, whichever is greater (some models) |
| Fan cooled |
| Low leakage option available (some models) |
| Current sharing available |
| Vantage Line available * |
| ConverterPACs – Slide-in Chassis for MegaPACs | RoHS compliant |
| DC OK / Power Good option available |
| Adjustment ranges from 50% to 110% of nominal on some models |
| Low noise options to 10 mV p-p or 0.15% whichever is greater on some models |
| Current source outputs available |
| RackGuard – AC and DC Redundant Input Power Supply | AC Input: 115/230 Vac autoranging |
| DC Input: 48 V (38 – 72 V) or 150 V (105 – 200 V) |
| AC input and DC input provide redundant input operation. |
| 600 W max output power |
| Two configurable outputs: 400 W and 200 W |
| Cooling: Convection |
| Badger – MIL-COTS PFC Power Supply | EMI compliance: MIL-STD-461E CE 101, 102; CS 101, 114, 115, 116 |
| Transient protection: MIL-STD-704E |
| Environmental: MIL-STD-810E |
| Fan cooled |
| Harmonic distortion to EN61000-2 |
| Ride-through (holdup) time: >20 msec at 1,200 W load |
| Conformal coating available |
| Low temperature: Operating down to -55°C |
| Soft start for limiting inrush current: AC power OK status signal |
| Output sequencing & general shutdown |
| Local sense standard all outputs; Remote sense available |
| OCP, OVP & OTP on all outputs |
| Military COTS Javelin – PFC Power Supply | MIL-STD-704E AC Input |
| MIL-STD-461E EMI: CE101, 102; RE101, 102 |
| Shock and vibration to MIL-STD-167-1, MIL-STD-810 & MIL-S-901 |
| PFC threshold: Less than 3% THD; 3-Phase configuration nearly sinusoidal input current |
| Ride-through (holdup) time:>20 msec at 1,200 W load |
| Case-to-case paralleling capability |
| Inhibit & enable inputs, DC OK, automatic remote sense |
| Soft start for limiting inrush current; AC Power OK status signal |
| Output OCP, OVP, & OTP |
| Optional conformal coating |
| PowerBank – AC-DC & DC-DC Low Profile Power Supply Family | 19" rack-mount, 1U |
| Internal fans, conduction or convection cooling |
| Up to 6 configurable outputs |
| Power OK signal, ON/OFF control input |
| PFC FrontEnd – 375 V Output | RoHS compliant |
| Single, dual, triple or quad non-isolated outputs |
| Power Factor Corrected (PFC) |
| Low profile 1.72" (43,6) |
| High power density >28 W/in3 |
| Integral cooling fan |
| Meets MIL-STD-810E for vibration |
| DIN rail mountable |
| PFC FlatPAC – AC-DC Single Output Power System | Power factor: 0.99 |
| High efficiency |
| Remote sense |
| Current limit |
| Thermal shut down |
| Overvoltage protection |
| FIAM – Filter Input Attenuator Module | EMI filtering-Class A |
| Inrush current limiting |
| Transient protection |
| Low profile mounting options |
| 10 and 20 A versions |
| Mini-sized package |
| IAM – Input Attenuator Module | High surge withstand |
| Input reverse polarity protection |
| Logic disable |
| Expansion output for arrays |
| Input Filters & Evaluation Boards |
| Input Filters |
| QPI-3LZ | 7 Amp Active EMI Filter for 24 V |
| DC Bus |
| QPI-4LZ | 7 Amp Active EMI Filter for 48 V |
| DC Bus |
| QPI-5LZ | 14 Amp Active EMI Filter for 24 V |
| DC Bus |
| QPI-6LZ | 14 Amp Active EMI Filter for 48 V |
| DC Bus |
| QPI-7LZ | 6 Amp Active EMI Filter, with integrated Hot-Swap, for 24 V DC Bus |
| QPI-8LZ | 6 Amp Active EMI Filter, with integrated Hot-Swap, for 48 V DC Bus |
| Input Filters for V•I Chips |
| QPI-9LZ | 6 Amp EMI Filter, with integrated |
| Hot-Swap for 24 V V•I Chip |
| QPI-10LZ | 6 Amp EMI Filter, with integrated |
| Hot-Swap for 48 V V•I Chip |
| QPI-11LZ | 7 Amp V•I Chip EMI Filter for 24 V |
| V•I Chip products |
| QPI-12LZ | 7 Amp V•I Chip EMI Filter for 48 V |
| V•I Chip products |
| MIL-COTS Input Filters |
| MQPI-18LP | 7 Amp MIL-COTS EMI Filter for 28 V |
| V•I Chip products |
| Power Path Management Evaluation Boards |
| PI2001 - EVAL1 | PI2001 Active ORing Controller IC Evaluation Board; in high-side configuration |
| PI2002 - EVAL1 | PI2002 Active ORing Controller IC Evaluation Board; with load disconnect feature |
| PI2003 - EVAL1 | PI2003 Active ORing Controller IC Evaluation Board; for -48V low-side applications |
| PI2121-EVAL1 | PI2121 Active ORing Full-Function solution Evaluation Board; configured for a high-side ground referenced application. Also compatible with the PI2123 solution. |
| PI2122-EVAL1 | PI2122 Active ORing Full-Function solution Evaluation Board; with load disconnect feature |
| PI2125-EVAL2 | PI2125 Active ORing Full-Function solution Evaluation Board; configured for a high-side floating application. Also compatible with PI2123. |
| Active Input EMI Filter Evaluation Boards |
| CB1 Boards are compatible with mounting DOSA compliant DC-DC converters. |
| For universal plug in evaluation boards substitute CB1 with EVAL1. |
| QPI-3-CB1 | QPI-3LZ DOSA Compatible Evaluation Board for 7A, 24V input Active EMI Filter |
| QPI-4-CB1 | QPI-4LZ DOSA Compatible Evaluation Board for 7A, 48V input Active EMI Filter |
| QPI-5-CB1 | QPI-5LZ DOSA Compatible Evaluation Board for 14A, 24V input Active EMI Filter |
| QPI-6-CB1 | QPI-6LZ DOSA Compatible Evaluation Board for 14A, 48V input Active EMI Filter |
| QPI-7-CB1 | QPI-7LZ DOSA Compatible Evaluation Board for 6A, 24V input Active EMI Filter with Hot-Swap |
| QPI-8-CB1 | QPI-8LZ DOSA Compatible Evaluation Board for 6A, 48V input Active EMI Filter with Hot-Swap |
| QPI-3-EVAL1 | QPI-3LZ Universal Evaluation Board for 7A, 24V input Active EMI Filter |
| QPI-4-EVAL1 | QPI-4LZ Universal Evaluation Board for 7A, 48V input Active EMI Filter |
| QPI-5-EVAL1 | QPI-5LZ Universal Evaluation Board for 14A, 24V input Active EMI Filter |
| QPI-6-EVAL1 | QPI-6LZ Universal Evaluation Board for 14A, 48V input Active EMI Filter |
| QPI-7-EVAL1 | QPI-7LZ Universal Evaluation Board for 6A, 24V input Active EMI Filter with Hot-Swap |
| QPI-8-EVAL1 | QPI-8LZ Universal Evaluation Board for 6A, 48V input Active EMI Filter with Hot-Swap |
| V•I Chip Optimized Filter Carrier (Evaluation) Boards |
| QPI-9-CB1 | QPI-9LZ Filter with Hot-Swap Carrier Board, compatible with 24V input V•I Chip "-CB" Boards, up to 6A |
| QPI-10-CB1 | QPI-10LZ Filter with Hot-Swap Carrier Board, compatible with 48V input V•I Chip "-CB" Boards, up to 6A |
| QPI-11-CB1 | QPI-11LZ Filter Carrier Board, compatible with 24V input V•I Chip Module "-CB" Boards, up to 7A |
| QPI-12-CB1 | QPI-12LZ Filter Carrier Board, compatible with 48V input V•I Chip Module "-CB" Boards, up to 7A |
| Military COTS V•I Chip Optimized Filter Carrier (Evaluation) Board |
| MQPI-18-CB1 | MQPI-18LP Filter Carrier Board, compatible with 28V input MIL-COTS V•I Chip Module "-CB" Boards, up to 7A |
| MicroRAM – Output Ripple Attenuator Module | >40 dB ripple attenuation from 60 Hz to 1 MHz |
| Integrated ORing diode supports N+1 redundancy |
| Significantly improves load transient response |
| User selectable performance optimization |
| Combined active and passive filtering |
| 20 and 30 Ampere ratings |
| RAM – Ripple Attenuator Module | 10 A and 20 A models |
| Reduces output ripple to >3 mV pp (VI-200) |
| Compatible with any VI-200 / VI-J00 based product |
| with a 5 – 50 Vdc output |
| No adjustments required |
| Converter sense, trim, overvoltage and overcurrent retained |
| Output Filters & Evaluation Boards |
| Output Filters |
| QPO Family | Active Output Ripple Attenuators |
| QPO-1LZ | Output Ripple Attenuation (SiP) |
| QPO-2LZ | Low Voltage Output Ripple Attenuator |
| Output Filter Evaluation Boards |
| QPO-1-EVAL1 | Universal Evaluation Board |
| QPO-1-EVAL3 | QPO-1 Evaluation Board for Micro Footprint DC-DC Converters |
| QPO-1-EVAL5 | QPO-1 Evaluation Board for Mini Footprint DC-DC Converters |
| QPO-2-EVAL1 | QPO-2 EVAL1 Evaluation Board for QPO-2 Active Output Filter |
| MIL-COTS VI BRICK™ PRM + VTM Thermally Enhanced | Power density up to 156 W/in3 |
| High efficiency |
| Low noise |
| Fast transient response |
| 100°C baseplate operation |
| Flexible architecture |
| Small footprint: 2.08 in2 |
| MIL-COTS Maxi, Mini and Micro DC-DC Converters | |
| MI-200 / MI-J00 DC-DC Converters | MIL-STD-810 and MIL-STD-202 qualified |
| NAVMAT component derating guidelines |
| 75 and 100 W booster modules available |
No comments:
Post a Comment